Regular Slotted Case (RSC)
This is the most popular style of case due to its versatility.
Easy to erect and can be closed by taping or gluing the top and bottom flaps (flaps butting).
Comes pre-glued on the side seam.
Cost effective solution
Min length: 100mm
Min width: 86mm
Min depth: 100mm
Maximum dimensions up to 1500mm but will vary depending on box configuration
Fully Overlapping Flap Regular Slotted Case (FOLF)
Same style as an RSC except the top flaps or bottom flaps (or both) fully overlap.
Comes pre-glued on the side seam.
Extra layer of material will provide additional cushioning and strength.
Ideal for larger, heavier objects that require extra protection or stacking ability.
Min length: 100mm
Min width: 86mm
Min depth: 100mm
Maximum dimensions up to 1500mm but will vary depending on box configuration
Half Slotted Case (HSC)
Like an RSC except with no top flaps (open).
Easy to erect and can be closed by taping or gluing the bottom flaps.
Comes pre-glued on the side seam.
Often supplied with a lid and is ideal for products of variable height (lid becomes telescopic).
Suitable if the box is required to be opened regularly.
Min length: 100mm
Min width: 86mm
Min depth: 100mm
Maximum dimensions up to 1500mm but will vary depending on box configuration
Box and Lid
A two-piece solution often used for low height products.
Lid height can be full depth or variable.
Both box and lid are supplied flat and can be erected by either taping, gluing or stapling the corners.
Also suitable style for boxes required to be opened regularly.
Two-piece style offers better stacking strength.
Min length: 100mm
Min width: 86mm
Min depth: 100mm
Maximum dimensions up to 1500mm but will vary depending on box configuration
5 Panel Folder (5PF)
A creased 5-panel folder that wraps around the product and is taped closed.
Ideal for packing large flat items or long narrow items.
Can have flaps on both ends or can be open on the ends (no flaps).
Available in two configurations:
- 5th panel overlaps 1st panel on the side;
- 1st and 5th panel butt in the middle.
Minimum length = 100mm
Minimum width = 100mm
Minimum depth option A = 86mm
Minimum depth option B = 20mm
Maximum dimensions will vary depending on box configuration
Layer Pads / Creased Board
Autobox can also supply layer pads or creased board to help further protect and/or separate the items being packed.
These are available in all material we carry.
Min sheet: 300mm x 250mm
Max sheet: 2400mm x 1800mm
